Home > HTM Series: 33-227 GPM > HTM Pump with 110V Motor >

HTM 6 PVDF 3/4-HP Single Phase Motor
Sodium hydroxides and corrosive liquid pumping using a GemmeCotti GHTM6PV-3/4SGLMag Drive Centrifugal Pump
 
Alternative Views:
Our Price: $2,123.00


Availability: Ships from Stock
Qty:

Description Performance Curves Drawings
 

HTM 6 PVDF 3/4-HP Single Phase Motor

Sodium Hydroxides Pumping using a Mag Drive Pump

The 33 GPM HTM 6 PVDF Magnetic Coupled centrifugal pump by Gemmecotti is a durable and efficient corrosion resistant pump made in thermoplastic polyvinylidene flouride material. It is coupled to a robust 3/4 HP, Single Phase, 110 Volt, Totally Enclosed, Fan Cooled NEMA motor. Our recommended pumping application for this pump is for Sodium Hydroxides and transfer applications without suspended solids such as:

  • Ferric Chlorides
  • Acids
  • Alkali Pumping
  • Clean Hydroxides
  • Calcium Hydroxides

The HTM6PV-3/4-1PH is also an ideal pump for circulation pumping applications where corrosive and dangerous fluids are used and any pump leakage is a concern.

The unique design of a Magdrive Pump eliminates any chance for pump leakage. The internal magnets are mounted to a rotor which is coupled directly to the pump impeller and are sealed from the atmosphere by a protective shroud. The outer magnets are attached to a rotor which is mounted on the motor drive shaft. The external magnets convey power to the internal magnets when the motor turns, through the protective shroud, which is stationary. Therefore, the pump is seal less and there is no chance of pump leakage making it ideal for corrosive or difficult pumping applications.

  • Maximum Pump Flow 33 GPM
  • Maximum Pump Temperature 194°F
  • Maximum Pump Head 40 Ft.
  • Maximum Pump Pressure 90 PSI
  • Maximum Pump Viscosity 200 cSt.
  • Pump Material Polyvinylidene Flouride
  • Suction Connection 1" NPT FEMALE
  • Discharge Connection .75" NPT MALE
  • Motor Power 3/4 HP Single Phase
  • O-ring Material VITON

Complete pump unit price includes the pump, base plate, ANSI Flange set and 3/4 HP Motor (3500 RPM, 110v, 1PH, 60Hz, TEFC NEMA).

If you have any questions regarding the applications you require and their suitability with a Gemmecotti Pump, please feel free to contact our engineering support staff and they'll be glad to assist you with any question you may have.

SS316 options are available upon request.

PTFE O-rings are available upon request.


Share your knowledge of this product. Be the first to write a review »